Elektronische en Elektromechanische Componenten
“Let’s make things compatible”

nieuwsbrief

EMC Filters

Speciaal voor EMI onderdrukking voor alle frequenties boven 1 Mhz. Alle ferrieten zijn toepasbaar voor de meest uiteenlopende frequenties.

Voor meer info zie www.Fair-Rite.com

  • Kabel componenten
  • Print circuit board ferriet
  • Bandkabel ferriet
  • Chip beads
  • Split kern ferriet
  • Rond en bandkabel ferriet
  • Ferrietringen
  • Ferrietstaven
  • Ferrietkraal
  • Ferrietkern / ferrietkernen
  • E /U en I ferrietmaterialen
  • Ferriettegels voor EMC kamers
  • Flexibel ferriet

Voor verkoop- en voorraadinformatie vragen wij u contact op te nemen.

I

  • Emikon

  • Pre-Filter

  • Premo

Power Filters

EMK 1 series
Single Phase Power Line Filters
The EMK series are specially designed for industrial frequency inverters, power drive systems and industrial power installations. According to the latest EMC and safety standards.

  • Single phase filters of 10 to 65A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / compact construction


EMK 3 series
Three Phase Power Line Filters
The EMK series are specially designed for industrial frequency inverters, power drive systems and industrial power installations. According to the latest EMC and safety standards.

  • Three phase filters from 6 to 1000A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / compact construction


EMK 4 series
Three Phase + Neutral Power Line Filters
The EMK series are specially designed for industrial frequency inverters, power drive systems and industrial power installations. According to the latest EMC and safety standards.

  • Three phase + neutral power line filters from 6 to 170A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / compact construction


EMK 251 series
Three Phase Power Line Filters
Three phase power line filters for industrial power installations.

  • Three phase filters from 4 to 24A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / compact construction
  • It accomplish the latest EMC and safety standards


VPE 3 /A series
Three Phase Power Line Filters
The VPE series are specially designed for industrial power installations. According to the latest EMC and safety standards.

  • Low leakage current
  • Easy to install
  • Mechanical compact structure. Low weight. Good thermal dissipation
  • Connection LINE/LOAD with busbars
  • Rated voltage 520, 690 and 760 VAC
  • Operating frequency: DC to 60Hz
  • Rated current 150 to 4000A
  • IT version


VPE 3 /B series
Three Phase Power Line Filters
The VPE series are specially designed for industrial power installations. According to the latest EMC and safety standards.

  • Low leakage current
  • Easy to install
  • Mechanical compact structure. Low weight. Good thermal dissipation
  • Connection LINE/LOAD with busbars
  • Rated voltage 520, 690 and 760 VAC
  • Operating frequency: DC to 60Hz
  • Rated current 150 to 4000A
  • IT version


EMS 1 series
Single Phase Power Line Filters
The EMS series are a power line filters specially designed for industrial power installations, frequency inverters, etc… This filters are an economic solution for general uses with a high attenuation performance.

  • Single phase filters from 20 to 100A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / Compact construction
  • According to the latest EMC and safety standards

EMS 3 series
Three Phase Power Line Filters
The EMS series are a power line filters specially designed for industrial power installations, frequency inverters, etc… This filters are an economic solution for general uses with a high attenuation performance.

  • Three phase filters from 20 to 210A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / Compact construction
  • According to the latest EMC and safety standards


EMS 4 series
Three Phase + Power Line Filters
The EMS series are a power line filters specially designed for industrial power installations, frequency inverters, etc… This filters are an economic solution for general uses with a high attenuation performance.

  • Three phase + filters from 20 to 100A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / Compact construction
  • According to the latest EMC and safety standards


EMSR 3 series
Three Phase Power Line Filters
The EMSR series are a power line filters specially designed for industrial power installations, frequency inverters, etc… This filters are an economic solution for general uses with a high attenuation performance.

  • Three phase + filters from 3 to 150A
  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / Compact construction
  • According to the latest EMC and safety standards


EBE 3 series
dV / dT Three Phase Filters
Output filter especially designed for frequency inverters and speed control systems. Reduce the leakage current. The ideal complement between inverter and motor.

  • 6 – 100A
  • Easy mound metallic compact box
  • High inductance
  • Leakage current reduction


VOT 3 series
Power Output Filter
Output filter especially designed for frequency inverters and speed control systems. Reduce the leakage current. The ideal complement between inverter and motor.

  • 150 – 4000A
  • Easy mound metallic compact box
  • High inductance
  • Leakage current reduction
  • Rated voltage from 250 to 760VAC


CMK series
Three Phase + Neutral Power Line Filters
The CMK series are specially designed for industrial frequency inverters, power drive systems and industrial power installations. According to the latest EMC and safety standards.

  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / compact construction
  • Maximum continious operating voltage: 4 x 520 / 300VAC
  • Operation frequency, DC to 60Hz
  • Rated currents 8 to 200A @ 50ºC
  • High potencial test voltage P->E2750VDC for 2 sec P->E2250VDC for 2 sec
  • Protection category IP20
  • Reliability: MTBF 220.000 @ 50°C
  • Overload: 4 times rated current at switch on, then 1.5 times rated current for 1 minute, once per hour
  • Climatic category -25ºC to +100ºC


CMS series
Three Phase + Neutral Power Line Filters
The CMS series are a power line filters specially designed for industrial power installations, frequency inverters, etc…
This filters are an economic solution for general uses with a high attenuation performance.

  • High attenuation in assym. and symm. modes
  • Low leakage current
  • Easy to install / compact construction
  • According to the latest EMC and safety standards
  • Maximum continious operating voltage: 4 x 520 / 300VAC
  • Operation frequency, DC to 60Hz
  • Rated currents 8 to 160A @ 50ºC
  • High potencial test voltage P->E2750VDC for 2 sec P->E2250VDC for 2 sec
  • Protection category IP20
  • Reliability: MTBF 220.000 @ 50°C
  • Climatic category -25ºC to +100ºC


DCC series
Direct Current Power Line Filters
The DCC series are specially designed for industrial power installations in DC current.
The principal applications are train, solar and wind energy and insdustrial applications in general sectors.

  • Low leakage current
  • Easy to install
  • Mechanical compact structure. Low weight. Good thermal dissipation
  • Connection LINE/LOAD with busbars
  • Rated voltage 750, 1000, 2000 VDC. Standard version 750VDC for the other tensions please specify the required tension.
  • Rated currents 150 to 1000A

Output Chockes


Output Chokes
The Output Chokes can be used in combination with line filters to diminish the electromagnetic interference.

They are specially effective when the interferences radiated by the connection driver to the motor, cause disturbances in the control systems, data lines or radio and television receivers located near the installation. The setting up of the appropriate choke in the connection cable to the motor, can solve this kind of problems.

Occasionally, the problems of electromagnetic compatibility can appear in an installation when the components that are part of the same control group affect each other; for example, the open control panels can produce interference on the low amplitude signal circuits of sensors. In these cases the inclusion of a toroidal inductance in the cables of the control circuit and sensors, usually solves the problem. Normally, to determine the number and situation of the additional chokes is necessary to make some tests until getting the best configuration.

General purpose filters


EMK 105
General Purpose Filters
Filter designed for high interference levels. With a wide range of intensities.

  • From 1A to 10A
  • Compacted box with 6.3 Faston connection
  • Low leakage current 0.8mA maximum


EMK 106
General Purpose Filters
Filter designed for high interference levels. With a wide range of intensities.

  • From 1A to 10A
  • Compacted box with 6.3 Faston connection
  • Low leakage current 0.8mA maximum


EMK 200
General Purpose Filters
Filter for interference supression, of low price in a plastic box, designed for printed circuit aplications.

  • From 0.5A to 6A
  • Plastic box with printed circuit connections
  • Low leakage current 0.5mA


EMK 210
General Purpose Filters
Filter for interference supression, of low price in a plastic box, designed for printed circuit aplications.

  • From 0.5A to 6A
  • Plastic box with printed circuit connections
  • Low leakage current 0.5mA


EMK 220
General Purpose Filters
Filter for interference supression, of low price in a plastic box, designed for printed circuit aplications.

  • From 0.5A to 6A
  • Plastic box with printed circuit connections
  • Low leakage current 0.5mA


EMK 240
General Purpose Filters
Filter for interference supression, of low price in a plastic box, designed for printed circuit aplications.

  • From 0.5A to 6A
  • Plastic box with printed circuit connections
  • Low leakage current 0.5mA


EMK 250
General Purpose Filters
Filter for interference supression, of low price in a plastic box, designed for printed circuit aplications.

  • From 0.5A to 6A
  • Plastic box with printed circuit connections
  • Low leakage current 0.5mA


EMK 505
General Purpose Filters
Filter for interference supression with IEC connector, for applications in high levels of interference.

  • From 1A to 10A
  • Compacted metalic box with IEC connector (LINE), and 6.3 Faston connection
  • Low leakage current 0.8mA


EMK 610
General Purpose Filters
Filter for interference supression with IEC connector, for applications in high levels of interference.

  • From 5A to 20A
  • Compact metalic box with 6.3 Faston connections or screw terminals M4 (cables version, according customer demands)
  • Low leakage current 0.8mA


EMK 680
General Purpose Filters
Filter for interference supression with IEC connector, for applications in high levels of interference.

  • From 5A to 20A
  • Compact metalic box with 6.3 Faston connections or screw terminals M4 (cables version, according customer demands)
  • Low leakage current 0.8mA

EMK 700
General Purpose Filters
Filter for interference supression with IEC connector, for applications in high levels of interference.

  • From 5A to 20A
  • Compact metalic box with 6.3 Faston connections or screw terminals M4 (cables version, according customer demands)
  • Low leakage current 0.8mA


EMK 720
General Purpose Filters
Filter designed for general purpose, for high levels of interference and specially for control systems, power supply, power conversor and motor.

  • From 1A to 10A
  • Compact metalic box with 6.3 Faston connections or screw terminals M4 (cables version, according customer demands)
  • Low leakage current 0.8mA

Sinus filters

SF series
Sinus Filters

The frequency inverters for the speed control of the AC motor, nowadays, in all industrial areas are to be find and in different applications such as bombs, air conditioning systems, scheme tool and in industrial automation in general.

The frequency inverters uses technical as PWM, output voltage quick pulses, etc… These techniques have some disadvantages like motor oneheat, high levels of electromagnetic interference and the necessity of expensive shielded cables.

The senoidal output filters for frequency inverters are designed in order to provide a complete solution to all these problems.

  • Overload reduction
  • dv/dt limitation
  • Electromagnetic interference reduction